Effect of ethanol addition on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes.

The effects of ethanol on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes (e-TBSQ and e-TBSR) were investigated. Ethanol restricted the gelatinization of Tartary buckwheat starch (TBS), which resulted an increase in ∆H, G' and G" as well as a decrease in apparent viscosity of e-TBSQ and e-TBSR. The particle size, scanning electron microscopy and X-ray diffraction results showed that ethanol influenced the morphological structure of TBS granules and the starch crystalline structure in e-TBSQ and e-TBSR changed from B-type to V-type when the ethanol concentration was 25%. Saturation transfer difference-nuclear magnetic resonance results revealed that ethanol weakened the binding ability of quercetin/rutin to TBS in e-TBSQ and e-TBSR, leading to a change in the binding site on the quercetin structural unit. The residual ungelatinized TBS granules in e-TBSQ and e-TBSR induced a high slowly digestible starch content, and thus displayed a "resistant-to-digestion".

Morphological-metabolic analysis in Streptomyces rimosus microparticle-enhanced cultivations (MPEC).

Streptomyces produce a broad spectrum of biologically active molecules such as oxytetracycline and rimocidin, which are widely used in human and animal treatments. microparticle-enhanced cultivation (MPEC) is one of the tools used for Streptomyces bioprocesses intensification by the control of mycelial morphology. In the present work, morphological changes of Streptomyces rimosus caused by the addition of 10 µm talc microparticles in MPEC were correlated with the biosynthetic activity of the microorganism. Comparing the runs with and without microparticles, major morphological changes were observed in MPEC, including the deformation of pellets, variation of their size, appearance of hyphae and clumps as well as the aggregation of mycelial objects. The presence of talc microparticles also influenced the levels of the studied secondary metabolites produced by S. rimosus. Comparing control and MPEC runs, the addition of talc microparticles increased the amounts of oxytetracycline (9-fold), 2-acetyl-2-decarboxamido-oxytetracycline (7-fold), milbemycin A3+4[O] (3-fold) and CE 108 (1.5-fold), while rimocidin (27-ethyl) and milbemycin ß11+4[O] production was reduced. In summary, the addition of talc microparticles to S. rimosus cultivations led to the development of smaller morphological forms like hyphae and clumps as well as to the changes in the amounts of secondary metabolites.

Sex ratio shift after frozen single blastocyst transfer in relation to blastocyst morphology parameters.

The sex ratio shift was observed in peoples who underwent ART treatment. Moreover, there is limited evidence on differences in sex ratio between single frozen-thawed blastocyst morphology, insemination type and transfer days. So further research is needed in this area with regard to factors possibly affecting the sex ratio. Retrospective study based on multicenter including two large assisted reproduction centers in Shanghai and Wuhan in China. A total of 6361 singleton delivery offspring after frozen-thawed blastocyst transfer. Propensity score weighting and logistic regression models were used to estimate the associations between blastocyst morphology grading and child sex ratio. The main outcome measures is singleton sex ratio. In our study, the primary outcome measure was sex ratio which was calculated as the proportion of male newborns among all live births. Higher quality blastocysts resulted in a higher sex ratio than single poor-quality frozen-thawed blastocyst transfer. Among the three blastocyst morphological parameters of trophectoderm (TE), Grade A and B were significantly associated with a higher sex ratio than Grade C. The similar trend was observed in both IVF and ICSI treated subgroups. As compared with expansion (4 + 3), expansion degree 6 achieved a higher sex ratio in overall populations and IVF treated subgroup. Transferring blastocysts of day 6 had the highest sex ratio both in IVF group and ICSI group. A 6.95% higher sex ratio in transferring blastocysts of day 5 in IVF group than those in ICSI group. No significant association between inner cell mass degree and sex ratio was observed. However, as compared with IVF treatment, all morphology parameters achieved the similar or the biased sex ratio favoring female in ICSI treated subgroup. Quality of blastocysts was positively associated with sex ratio. TE score and expansion degree rather than ICM were significantly associated with sex ratio at birth. ICSI treatment promotes the biased sex ratio favoring female.

Male genital system of Ameiva ameiva (Squamata: Teiidae).

Understanding squamate reproductive morphology is crucial for investigating ecological, behavioral, and evolutionary questions. Here, we describe the anatomy and histology of the male genital system of Ameiva ameiva from southeastern Brazil. Ten adult males were dissected to characterize genital macroscopy and collect fragments of the testes, gonadoducts, and kidneys for histological examination. We examined 10 transverse histological sections per individual and measured the epithelial height of the epididymis and ductus deferens. The male reproductive system consists of a pair of yellowish oval testes, the rete testis, ductuli efferentes, epididymis, ductus deferens, ampulla ductus deferentis, sexual segment of the kidney (SSK), cloaca, and hemipenis. The hemipenis is elongated, cylindrical, and unilobed, with a sulcate face and an asulcate face, which has continuous fringes throughout its length. Seminiferous tubules exhibited germ cells at various stages. The epididymis is wider and more coiled than the ductus deferens. The rete testis has a simple squamous epithelium with long stereocilia, while the narrower ductuli efferentes are lined by a simple ciliated cuboidal epithelium. The epididymal epithelium is pseudostratified columnar, with basal and ciliated principal cells, whereas the ductus deferens epithelium is pseudostratified to simple cuboidal. The epididymal epithelium is 1.5 times taller than the ductus deferens epithelium. Here, we observed the SSK present in the cortex of the ventral region of the kidneys due to the hypertrophy of the distal convoluted tubules, as well as its secretory activity. Our findings will contribute to future research into the evolution of squamate reproductive morphology.

Non-invasive in vivo study of morphology and mechanical properties of the median nerve.

The current literature studied the median nerve (MN) at specific locations during joint motions. As only a few particular parts of the nerve are depicted, the relevant information available is limited. This experiment investigated the morphological and biomechanical properties of the MN. The effects of the shoulder and wrist motions on MN were explored as well. Eight young healthy female individuals were tested with two-dimensional ultrasound and shear wave elastography (SWE). The morphological and biomechanical properties were examined in limb position 1, with the wrist at the neutral position, the elbow extended at 180°, and the shoulder abducted at 60°. In addition, the experiment assessed the differences among the wrist, forearm, elbow, and upper arm with Friedman's test and Bonferroni post hoc analysis. Two groups of limb positions were designed to explore the effects of shoulder movements (shoulder abducted at 90° and 120°) and wrist movements (wrist extended at 45° and flexed at 45°) on the thickness and Young's modulus. Differences among the distributions of five limb positions were tested as well. The ICC3, 1 values for thickness and Young's modulus were 0.976 and 0.996, respectively. There were differences among the MN thicknesses of four arm locations in limb position 1, while Young's modulus was higher at the elbow and wrist than at the forearm and upper arm. Compared to limb position 1, only limb position 4 had an effect on MN thickness at the wrist. Both shoulder and wrist motions affected MN Young's modulus, and the stiffness variations at typical locations all showed a downward trend proximally in all. The distributions of MN thickness and Young's modulus showed fold line patterns but differed at the wrist and the pronator teres. The MN in the wrist is more susceptible to limb positions, and Young's modulus is sensitive to nerve changes and is more promising for the early diagnosis of neuropathy.

Morpho-electric diversity of human hippocampal CA1 pyramidal neurons.

Hippocampal pyramidal neuron activity underlies episodic memory and spatial navigation. Although extensively studied in rodents, extremely little is known about human hippocampal pyramidal neurons, even though the human hippocampus underwent strong evolutionary reorganization and shows lower theta rhythm frequencies. To test whether biophysical properties of human Cornu Amonis subfield 1 (CA1) pyramidal neurons can explain observed rhythms, we map the morpho-electric properties of individual CA1 pyramidal neurons in human, non-pathological hippocampal slices from neurosurgery. Human CA1 pyramidal neurons have much larger dendritic trees than mouse CA1 pyramidal neurons, have a large number of oblique dendrites, and resonate at 2.9 Hz, optimally tuned to human theta frequencies. Morphological and biophysical properties suggest cellular diversity along a multidimensional gradient rather than discrete clustering. Across the population, dendritic architecture and a large number of oblique dendrites consistently boost memory capacity in human CA1 pyramidal neurons by an order of magnitude compared to mouse CA1 pyramidal neurons.

Autonomous fetal morphology scan: deep learning + clustering merger - the second pair of eyes behind the doctor.

The main cause of fetal death, of infant morbidity or mortality during childhood years is attributed to congenital anomalies. They can be detected through a fetal morphology scan. An experienced sonographer (with more than 2000 performed scans) has the detection rate of congenital anomalies around 52%. The rates go down in the case of a junior sonographer, that has the detection rate of 32.5%. One viable solution to improve these performances is to use Artificial Intelligence. The first step in a fetal morphology scan is represented by the differentiation process between the view planes of the fetus, followed by a segmentation of the internal organs in each view plane. This study presents an Artificial Intelligence empowered decision support system that can label anatomical organs using a merger between deep learning and clustering techniques, followed by an organ segmentation with YOLO8. Our framework was tested on a fetal morphology image dataset that regards the fetal abdomen. The experimental results show that the system can correctly label the view plane and the corresponding organs on real-time ultrasound movies.Trial registrationThe study is registered under the name "Pattern recognition and Anomaly Detection in fetal morphology using Deep Learning and Statistical Learning (PARADISE)", project number 101PCE/2022, project code PN-III-P4-PCE-2021-0057. Trial registration: ClinicalTrials.gov, unique identifying number NCT05738954, date of registration 02.11.2023.

An optimized CT-dense agent perfusion and micro-CT imaging protocol for chick embryo developmental stages.

Compared to classical techniques of morphological analysis, micro-CT (µ-CT) has become an effective approach allowing rapid screening of morphological changes. In the present work, we aimed to provide an optimized micro-CT dense agent perfusion protocol and µ-CT guidelines for different stages of chick embryo cardiogenesis. Our study was conducted over a period of 10 embryonic days (Hamburger-Hamilton HH36) in chick embryo hearts. During the perfusion of the micro-CT dense agent at different developmental stages (HH19, HH24, HH27, HH29, HH31, HH34, HH35, and HH36), we demonstrated that durations and volumes of the injected contrast agent gradually increased with the heart developmental stages contrary to the flow rate that was unchanged during the whole experiment. Analysis of the CT imaging confirmed the efficiency of the optimized parameters of the heart perfusion.

Application of nanosilica in the construction industry: A bibliometric analysis using Methodi Ordinatio.

The number of publications related to the implementation of nanotechnology in the construction industry, and specifically to the application of nanosilica (SiO2), has had a constant increase in recent years. Based on this, in the present work, an analysis was carried out using bibliometric techniques, with the aim at characterizing the development of specialized literature and identifying the largest areas of growth in the field, maintaining hydrophobic nanosilica as the research guideline. This analysis acquired information from the Scopus and Web of Science (WoS) databases to compare bibliometric indicators of the publications. It should be noted that, even though bibliometric analysis is useful to identify the study areas of greatest interest, to complement this work, the implementation of a method that helped in the research process to obtain the most important bibliography was required. This study implemented Methodi Ordinatio, which helped to take a new direction. Therefore, based on this method, a list of articles cataloged and ranked is obtained, which is the basis for integrating the final bibliographic portfolio. •The study applies the Methodi Ordinatio to obtain a portfolio of the most relevant articles to guide the researchers' work.•Insightful information can be obtained using VOSviewer to analyze and visualize metadata of the bibliographic portfolio.•The study demonstrates how the alpha value in the InOrdinatio formula modifies the resulting portfolio.

Using high-throughput phenotype platform MVS-Pheno to reconstruct the 3D morphological structure of wheat.

It is of great significance to study the plant morphological structure for improving crop yield and achieving efficient use of resources. Three dimensional (3D) information can more accurately describe the morphological and structural characteristics of crop plants. Automatic acquisition of 3D information is one of the key steps in plant morphological structure research. Taking wheat as the research object, we propose a point cloud data-driven 3D reconstruction method that achieves 3D structure reconstruction and plant morphology parameterization at the phytomer scale. Specifically, we use the MVS-Pheno platform to reconstruct the point cloud of wheat plants and segment organs through the deep learning algorithm. On this basis, we automatically reconstructed the 3D structure of leaves and tillers and extracted the morphological parameters of wheat. The results show that the semantic segmentation accuracy of organs is 95.2%, and the instance segmentation accuracy AP50 is 0.665. The R2 values for extracted leaf length, leaf width, leaf attachment height, stem leaf angle, tiller length, and spike length were 0.97, 0.80, 1.00, 0.95, 0.99, and 0.95, respectively. This method can significantly improve the accuracy and efficiency of 3D morphological analysis of wheat plants, providing strong technical support for research in fields such as agricultural production optimization and genetic breeding.

Filamentous morphology engineering of bacteria by iron metabolism modulation through MagR expression.

The morphology is the consequence of evolution and adaptation. Escherichia coli is rod-shaped bacillus with regular dimension of about 1.5 µm long and 0.5 µm wide. Many shape-related genes have been identified and used in morphology engineering of this bacteria. However, little is known about if specific metabolism and metal irons could modulate bacteria morphology. Here in this study, we discovered filamentous shape change of E. coli cells overexpressing pigeon MagR, a putative magnetoreceptor and extremely conserved iron-sulfur protein. Comparative transcriptomic analysis strongly suggested that the iron metabolism change and iron accumulation due to the overproduction of MagR was the key to the morphological change. This model was further validated, and filamentous morphological change was also achieved by supplement E. coli cells with iron in culture medium or by increase the iron uptake genes such as entB and fepA. Our study extended our understanding of morphology regulation of bacteria, and may also serves as a prototype of morphology engineering by modulating the iron metabolism.

The association between O2-pulse slope ratio and functional severity of coronary stenosis: A combined cardiopulmonary exercise testing and quantitative flow ratio study.

Background: The role of cardiopulmonary exercise testing (CPET) parameters in evaluating the functional severity of coronary disease remains unclear. The aim of this study was to quantify the O2-pulse morphology and investigate its relevance in predicting the functional severity of coronary stenosis, using Murray law-based quantitative flow ratio (µQFR) as the reference. Methods: CPET and µQFR were analyzed in 138 patients with stable coronary artery disease (CAD). The O2-pulse morphology was quantified through calculating the O2-pulse slope ratio. The presence of O2-pulse plateau was defined according to the best cutoff value of O2-pulse slope ratio for predicting µQFR ≤ 0.8. Results: The optimal cutoff value of O2-pulse slope ratio for predicting µQFR ≤ 0.8 was 0.4, with area under the curve (AUC) of 0.632 (95 % CI: 0.505-0.759, p = 0.032). The total discordance rate between O2-pulse slope ratio and µQFR was 27.5 %, with 13 patients (9.4 %) being classified as mismatch (O2-pulse slope ratio > 0.4 and µQFR ≤ 0.8) and 25 patients being classified as reverse-mismatch (O2-pulse slope ratio ≤ 0.4 and µQFR > 0.8). Angiography-derived microvascular resistance was independently associated with mismatch (OR 0.07; 95 % CI: 0.01-0.38, p = 0.002) and reverse-mismatch (OR 9.76; 95 % CI: 1.47-64.82, p = 0.018). Conclusion: Our findings demonstrate the potential of the CPET-derived O2-pulse slope ratio for assessing myocardial ischemia in stable CAD patients.

Normal table of embryonic development in the Anji salamander Hynobius amjiensis (Hynobiidae).

We established a normal embryonic development table for the Anji salamander Hynobius amjiensis, a critically endangered tailed amphibian of the family Hynobiidae with a very limited distribution in East China, following the standards set by the early developmental table of vertebrates. Put together 32 embryonic stages for the Anji salamander was defined. The total embryonic period from oviposition to hatching is approximately 30 days at 9 °C. Stages 1-16 represent early development from cleavage to neurulation. Stages 17-32 represent organogenesis documenting later developmental events such as tail, gill, and limb formation, and hatching (Stage 32). We provided a detailed description of the external morphology and color changes of the head, trunk, limbs, tail, external gills, and balancers at various stages from egg-laying to hatching. We also described several cases of abnormal embryonic development. The establishment of the embryonic development table in H. amjiensis contributes to better understanding of the ontogeny in tailed amphibians, distinguishing closely related species, and identifying abnormal embryonic amphibians.

Exogenous melatonin delays leaves senescence and enhances saline and alkaline stress tolerance in grape seedlings.

Saline and alkaline stress is one of the major abiotic stresses facing agricultural production, which severely inhibits the growth and yield of plant. The application of plant growth regulators can effectively prevent crop yield reduction caused by saline and alkaline stress. Exogenous melatonin (MT) can act as a signaling molecule involved in the regulation of a variety of physiological processes in plants, has been found to play a key role in enhancing the improvement of plant tolerance to abiotic stresses. However, the effects of exogenous MT on saline and alkaline tolerance of table grape seedlings and its mechanism have not been clarified. The aim of this study was to investigate the role of exogenous MT on morphological and physiological growth of table grape seedlings (Vitis vinifera L.) under saline and alkaline stress. The results showed that saline and alkaline stress resulted in yellowing and wilting of grape leaves and a decrease in chlorophyll content, whereas the application of exogenous MT alleviated the degradation of chlorophyll in grape seedling leaves caused by saline and alkaline stress and promoted the accumulation of soluble sugars and proline content. In addition, exogenous MT increased the activity of antioxidant enzymes, which resulted in the scavenging of reactive oxygen species (ROS) generated by saline and alkaline stress. In conclusion, exogenous MT was involved in the tolerance of grape seedlings to saline and alkaline stress, and enhanced the saline and alkaline resistance of grape seedlings to promote the growth and development of the grape industry in saline and alkaline areas.

Mapping QTLs for blight resistance and morpho-phenological traits in inter-species hybrid families of chestnut (Castanea spp.).

Chestnut blight (caused by Cryphonectria parasitica), together with Phytophthora root rot (caused by Phytophthora cinnamomi), has nearly extirpated American chestnut (Castanea dentata) from its native range. In contrast to the susceptibility of American chestnut, many Chinese chestnut (C. mollissima) genotypes are resistant to blight. In this research, we performed a series of genome-wide association studies for blight resistance originating from three unrelated Chinese chestnut trees (Mahogany, Nanking and M16) and a Quantitative Trait Locus (QTL) study on a Mahogany-derived inter-species F2 family. We evaluated trees for resistance to blight after artificial inoculation with two fungal strains and scored nine morpho-phenological traits that are the hallmarks of species differentiation between American and Chinese chestnuts. Results support a moderately complex genetic architecture for blight resistance, as 31 QTLs were found on 12 chromosomes across all studies. Additionally, although most morpho-phenological trait QTLs overlap or are adjacent to blight resistance QTLs, they tend to aggregate in a few genomic regions. Finally, comparison between QTL intervals for blight resistance and those previously published for Phytophthora root rot resistance, revealed five common disease resistance regions on chromosomes 1, 5, and 11. Our results suggest that it will be difficult, but still possible to eliminate Chinese chestnut alleles for the morpho-phenological traits while achieving relatively high blight resistance in a backcross hybrid tree. We see potential for a breeding scheme that utilizes marker-assisted selection early for relatively large effect QTLs followed by genome selection in later generations for smaller effect genomic regions.

Fusarium wilt constrains mungbean yield due to reduction in source availability.

Mungbean is an important source of plant protein for consumers and a high-value export crop for growers across Asia, Australia and Africa. However, many commercial cultivars are highly vulnerable to biotic stresses, which rapidly reduce yield within the season. Fusarium oxysporum is a soil-borne pathogen that is a growing concern for mungbean growers globally. This pathogen causes Fusarium wilt by infecting the root system of the plant resulting in devastating yield reductions. To understand the impact of Fusarium on mungbean development and productivity and to identify tolerant genotypes, a panel of 23 diverse accessions was studied. Field trials conducted in 2016 and 2021 in Warwick, Queensland, Australia under rainfed conditions investigated the variation in phenology, canopy and yield component traits under disease and disease-free conditions. Analyses revealed a high degree of genetic variation for all traits. By comparing the performance of these traits across these two environments, we identified key traits that underpin yield under disease and disease-free conditions. Aboveground biomass components at 50 % flowering were identified as significant drivers of yield development under disease-free conditions and when impacted by Fusarium resulted in up to 96 % yield reduction. Additionally, eight genotypes were identified to be tolerant to Fusarium. These genotypes were found to display differing phenological and morphological behaviours, thereby demonstrating the potential to breed tolerant lines with a range of diverse trait variations. The identification of tolerant genotypes that sustain yield under disease pressure may be exploited in crop improvement programs.

New Cretaceous Fossil Achilidae Taxa (Insecta, Hemiptera, Fulgoromorpha) from Burmese Ambers with Description of Niryasaburniini Trib. Nov.

A new species Niryasaburnia nigrutomia sp. nov. of the planthopper family Achilidae from Burmese amber collected from Hukawng Valley (Tanai) of northern Myanmar, is described, notably based on forewing pattern coloration and metatibiotarsal teeth conformation. A new fossil genus with its type species Sinuovenaxius kachinensis gen. et sp. nov. is also described. The tribe Niryasaburniini trib. nov. is established to include Niryasaburnia Szwedo, 2004, and Sinuovenaxius gen. nov., based on a unique combination of characters, of which the following states are particularly notable: head with compound eyes around half the length of pronotum, late forking of ScP+R and CuA after the fusion of Pcu+A1 on the forewing, apical teeth of metatarsomeres I and II both with subapical platellar sensilla, and a unique hindwing pattern with simple RP and biforked MP, CuA with two terminals only, and with A2 simple, reaching the posterior wing margin. The hindwing venation of this new tribe with RP with only one terminal and both MP and CuA with two terminals is unique in Achilidae.

Expanding the Mesozoic Record of Early Brachyceran Fly Larvae, including New Larval Forms with Chimera-Type Morphologies.

Diptera are one of the four megadiverse groups of holometabolan insects. Flies perform numerous ecological functions, especially in their larval stages. We can assume that this was already the case in the past; however, fly larvae remain rare in most deposits. Here we report new dipteran larvae preserved in Cretaceous (about 99 Ma) Kachin amber from Myanmar and, even older, Jurassic (about 165 Ma) compression fossils from China. Through light microscopy and micro-CT scanning we explore their peculiar morphology and discuss their possible phylogenetic affinities. Several larvae seem to represent the lineage of Stratiomyomorpha. A few others present characters unique to Xylophagidae (awl-flies), as well as to Athericidae (water sniper-flies), resulting in a chimeric morphology. Understanding the exact relationships of most of these specimens with a particular lineage remains challenging, since they differ considerably from any other known dipteran larvae and present some unique traits. Additionally, we report new specimens of Qiyia jurassica Chen et al., 2014, supposedly parasitic larvae, most likely representatives of Athericidae. These new findings offer valuable insights into the evolution of the early diversification of the brachyceran flies and underscore the importance of immature stages in understanding the evolutionary history and ecology of flies.

Foot Posture Index Does Not Correlate with Dynamic Foot Assessment Performed via Baropodometric Examination: A Cross-Sectional Study.

BACKGROUND: Clinicians employ foot morphology assessment to evaluate the functionality of the method and anticipate possible injuries. This study aims to correlate static foot posture and the dynamic barefoot evaluation in a sample of healthy adult participants. METHODS: The foot posture was evaluated using the Foot Posture Index-6 (FPI-6) and the dynamics were evaluated through baropodometric examination. Two operators independently assessed the participants' foot posture through FPI-6, and then a dynamic evaluation was performed by asking them to walk 8 times across a platform. One hundred participants (mean age: 32.15 ± 7.49) were enrolled. RESULTS: The inter-rater agreement between the two assessors was found to be excellent. The majority of the feet belonged to the 0 < FPI < 4 class (32%), followed by the 4 < FPI < 8 (31%) and the FPI > 8 ranges (19.5%). Our "area of contact" analysis showed a significant poor correlation between FPI and total foot, midfoot, and the second metatarsophalangeal joint (MTPJ) (-0.3 < r < 0). Regarding "force" parameters, the analysis showed a poor correlation between the midfoot, hallux, and the second toe (-0.2 < r < 2); finally the "pressure" analysis showed a poor correlation between FPI, the fourth MTPJ, and the second toe (-0.2 < rs < 0.3) and a moderate correlation between the hallux (r = 0.374) and the fifth MTPJ (r = 0.427). CONCLUSIONS: This study emphasizes the constrained correlation between static foot posture observation and dynamic barefoot examination.

High Modulus, Strut-like poly(ether ether ketone) Aerogels Produced from a Benign Solvent.

Poly(ether ether ketone) (PEEK) was found to form gels in the benign solvent 1,3-diphenylacetone (DPA). Gelation of PEEK in DPA was found to form an interconnected, strut-like morphology composed of polymer axialites. To our knowledge, this is the first report of a strut-like morphology for PEEK aerogels. PEEK/DPA gels were prepared by first dissolving PEEK in DPA at 320 °C. Upon cooling to 50 °C, PEEK crystallizes and forms a gel in DPA. The PEEK/DPA phase diagram indicated that phase separation occurs by solid-liquid phase separation, implying that DPA is a good solvent for PEEK. The Flory-Huggins interaction parameter, calculated as χ12 = 0.093 for the PEEK/DPA system, confirmed that DPA is a good solvent for PEEK. PEEK aerogels were prepared by solvent exchanging DPA to water then freeze-drying. PEEK aerogels were found to have densities between 0.09 and 0.25 g/cm3, porosities between 80 and 93%, and surface areas between 200 and 225 m2/g, depending on the initial gel concentration. Using nitrogen adsorption analyses, PEEK aerogels were found to be mesoporous adsorbents, with mesopore sizes of about 8 nm, which formed between stacks of platelike crystalline lamellae. Scanning electron microscopy and X-ray scattering were utilized to elucidate the hierarchical structure of the PEEK aerogels. Morphological analysis found that the PEEK/DPA gels were composed of a highly nucleated network of PEEK axialites (i.e., aggregates of stacked crystalline lamellae). The highly connected axialite network imparted robust mechanical properties on PEEK aerogels, which were found to densify less upon freeze-drying than globular PEEK aerogel counterparts gelled from dichloroacetic acid (DCA) or 4-chlorphenol (4CP). PEEK aerogels formed from DPA were also found to have a modulus-density scaling that was far more efficient in supporting loads than the poorly connected aerogels formed from PEEK/DCA or PEEK/4CP solutions. The strut-like morphology in these new PEEK aerogels also significantly improved the modulus to a degree that is comparable to high-performance crosslinked aerogels based on polyimide and polyurea of comparable densities.